The company is located in Wenzhou, since 1998 we introduced the advanced technology from German, has more than 20 years of factory history. We specialize in producing all kinds of plastic zippers and related machines.We have dozens of new high-output plastic production lines, thousands of molds.
Winding different layers paper strip into paper tube with glue.
Multi-cutting knife system, by servo tracking, cut paper tube into small piece of paper drinking straws.
Material: food grade white craft paper and food grade glue.
Sub-raw material: may need oil for lubrication and cooling. White mineral oil.
Standard electric power: 380V/ 3phase/ 50Hz, could change by special requirement.
1. Working Principle and short introduction：
Winding different layers paper strip into paper tube with glue.
Multi-cutting knife system, by servo tracking, cut paper tube into small piece of paper drinking straws.
Material: food grade white craft paper and food grade glue.
Sub-raw material: may need oil for lubrication and cooling. White mineral oil.
Standard electric power: 380V/ 3phase/ 50Hz, could change by special requirement
Electric consumption: Rated power, 6.15KW/h
FLA( Full load amp): 13.5A
Capacity:
How many pieces straw per minute. For example: 45m/min, making 6*197mm straws. Consider some waste, we use 225mm for calculating. 45*1000/200=225 pcs/minute.
How to judge the output speed: For 6 cutting blade model, 50m/min output speed, 5*197=985mm, nearly 1 meter. The cutting system need drop off nearly 50 times per minute in videos.
U could set total paper tube length in panel. 5*197=985mm. When paper tube arrives 985mm, the cutting blade drop down and cut into straws.It’s better to set 1000mm for paper tube length, waste a little at end to make last straw the same length with other straws.
Remark:
The speed above is paper tube output speed, not paper feeding speed. Some company use paper feeding speed to attract customer on YouTube.
To get a good quality and stable & no stop working, we suggest use a slower speed.
|
Technical Parameter |
|||
|
Paper layer |
2~4 layers |
Fixed length |
Enbcoder |
|
Inner diameter |
6~12mm |
Operator |
1~2 staff |
|
Thickness |
0.3~1mm |
Speed control |
Servo motor |
|
Speed |
0~60m/min |
Power supply |
380V/ 3 phase/ 50Hz |
|
Cutting length |
120~1050mm |
Glue method |
Three layer spray type |
|
Way of Gluing |
Single/double side |
Weight |
1350kg |
2. Glue station with heating function:
1) When workshop temperature low, cold, you could open heating function.
2) Glue tray could automatic up and down with a separate motor.
If you have any enquiry about quotation or cooperation,please feel free to email us at gdxs03@chinagaoda.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
